What Senseal’s
Customers
Say About Multi-Primer...
- “I believe your Clear Penetrating Epoxy Sealer [CPES
– Multi-Primer] is the best sealer I’ve ever
used.” Bruce MacKenzie, Senior Shipwright, USS Constitution,
Baltimore, MD, USA.
- “The products are as advertised – which is
exceptional these days.” D.M.
- “Senseal’s products work! Restoring a 63
foot Alaskan Trawler, they saved me about two years and
great expense. Use them – they’re fantastic!”
D.M.
- “I have used Multi-Primer on my boat, the “Vixen,”
built in 1904, houseboat and house – the dry rot bugs
hate me for it.” H.O.
- “I used Multi-Primer simply as a primer on some
areas of my boat’s hull where paint wouldn’t
stick, mostly due to oil-soaked wood. The stuff worked great.
I’m restoring the boat now with a new bottom, and
let me tell you, it was tough getting the paint off where
I had primed with Multi-Primer!” R.V.
- “I had a couple of shaft logs (wood around where
the propeller shafts go from inside to outside the boat)
with electrolysis damage, a 1964 36-foot cruiser with twin
238s (cubic inch engines). What this means is that the fibers
were there but there was nothing holding them together.
Well, not that bad, but not that good either, so…I
got to thinking and reading and came up with a plan. If
I could dry out those shaft logs, they would soak up Multi-Primer
like a sponge. The flexible nature of Multi-Primer would
be a close approximation of the Lignin (the natural glue
in wood that holds the fibers together) that was damaged
by the electrolysis. Great theory, but how to test…Well,
I had an old hunk of rotting wood that was crumbling to
bits before me. I soaked it, and looked at the result. It
was much better than I expected, and the test material was
much worse than the shaft logs…I decided to go forward…I
soaked it, but good…the next day…I saturated
it a second time. Now, due to work, I was out of town for
a week, so when I came back it was done. WOW! Solid wood,
that was not “crispy” like **** ******* [another
epoxy system’s] stuff. I was able to run screws in
it, and there was no cracking. The end result was I spent
two weeks and saved $10,000.” C.C.
Other epoxy makers claim their
products are the best…
Our customers tell us ours are!
Try them for yourself
We’re confident you’ll be amazed with the results!
|
|